2023 Wil-Rich 2530-25 Tillage

Options / Details

A list of options and details specific to the piece of equipment listed for sale on this page.

• 25' Working Width
• 25 Shanks
• 12" Spacing
• 1000 lb Spring Shank
• Tire Size VF295/75R22.5
• Walking Tandems
• 5/8"x26" Tines
• 3- bar Harrow Rows
• Single Point Depth Control
• LEVEL LIFT HITCH
• 375 HP The 2500 Series Chisel Plow from Wil-Rich integrates a deeper frame front to rear in a refined design compared to its predecessor. The deep frame utilizes four ranks to improve the flow of heavy residue from today’s higher yielding crops. The 2500 Series not only has a deep frame but also 3/8 in (9 mm) thick steel for even more strength. This makes it one of the strongest tillage implements on the market.
• Level lift hitches are designed to keep the unit level during field operation and transport. The operator can change working depth while maintaining consistent working depth from the front to the rear of the unit.
• FLOATING HITCH
• The floating hitch pivots between the tractor and the main frame. This pivot point allows the unit to follow the contour of the ground. The front castering gauge wheels are mechanically synchronized with the rear axle allowing the unit to maintain level working depth from front to rear.
• GAUGE WHEELS
• Hydraulic castering gauge wheels are standard on floating hitch models and ratchet adjust castering gauge wheels are standard on 31 ft (9.45 m) and larger wings.
• TRANSPORTATION
• 12R22.5 x 8.25 tires on 8-bolt hubs are used on all in-frame walking tandems to aid in wet working conditions and for increased reliability during transport.
• EXTENSION SPRING TRIP ASSEMBLY
• The 650 lbs (295 kg) extension spring trip assemblies of the 2500 series Chisel Plow are built to tackle the toughest soils.
• EXTENSION SPRING TRIP ASSEMBLY
• The 650 lbs (295 kg) extension spring trip assemblies of the 2500 series Chisel Plow are built to tackle the toughest soils.
• HYDRAULICS
• Hydraulics on the Wil-Rich 2500 Series Chisel Plow are a 10 in (25.4 cm) stroke Prince wing fold cylinder that varies the bore size to accommodate lift circuit phasing.