2019 John Deere 8295R Tractor

$240,244.00 USD
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor
2019 John Deere 8295R Tractor

Usage

  • Eng Hours: 2077.0

Sizes

  • Engine Horsepower: 295.0

Options / Details

A list of options and details specific to the piece of equipment listed for sale on this page.

  • Cab
  • Front Axle MFWD
  • Transmission Power Shift
  • Guidance-ready Yes
  • Guidance Display Yes
  • Rear PTO 1000
  • Rear Tires Duals
  • Tire Width Narrow
  • 16F/5R Speed PowerShift Transmission (PST) 42 km/h (26 mph)
  • 4600 CommandCenter
  • CommandCenter AutoTrac Activation
  • 4600 Processor
  • Standard CommandView III Cab
  • Standard Radio Package
  • Right-hand Reverser Bump-Shift-Type Transmission Controls
  • John Deere PowerTech 9.0 L (549 cu. in.) 6 Cylinder Tier 4/Stage V Compliant Diesel Engine
  • 227.1 L/min (60 gpm) Hydraulic Pump
  • Four Premium Rear Remote SCVs with Electrohydraulic (EH) Controls, Premium Couplers, and High Pressure Relief Levers
  • 45 mm (1-3/4 in.) 1,000 rpm (20-spline) PTO
  • 8,391 kg (18,500 lb) capacity 3-Point Hitch (Cat 3/3N) with Sway Blocks and Quik-Coupler
  • Category 3 adjustable Swinging Drawbar with a 38 mm (1.5 in.) Pin
  • 120 mm (4.72 in.) diameter by 3010 mm (118.5 in.) length with Double Taper Wheel Hubs
  • 380/90R54 152A8 R1W Radial in Dual Wheel Configuration
  • 1300 Series MFWD with Group 48 Rear Tires
  • 380/80R38 142A8 R1W Radial in Single Wheel Configuration - Eight Position
  • Standard Lighting
  • Fenders, Pivoting Front - 480 mm (18.9 in.) Wide
  • Ethernet Switch
  • Antenna Mount and Wiring for Business Band (2-Way) Radio
  • Cold Weather Start Kit
  • Weight, front support with sixteen suitcase weights
  • One Pair 205 kg (452 lb)

Base Model Specifications

Powered by IronGuidesIron Guides Image

Base model specifications of the 2019 John Deere 8295R Tractor are provided for general information only.

These specifications represent the most common configurations for the Model DescriptionJohn Deere 8295R in 2019. They may not describe John Deere's original specifications nor do they describe the specific 8295R Tractor listed for sale here.

  • Engine Make: JD
  • HP - Eng: 295
  • HP - PTO: 247
  • Engine C.I.D.: 549
  • Engine Fuel: Diesel
  • Engine Cyls: 6
  • Trans - Std: Powershift
  • Tires - Rear Duals: Incl
  • Tires - Front: 420/90R30
  • Tires - Rear: 480/80R46D
  • MFWD -: Incl
  • MFWD Type: 1300
  • Trans - Fwd/Rev Std: 16/5 P/Sh
  • PTO - Type: Ind
  • PTO - Speed: 1000
  • 3 Pt. Hitch Cat.: III,3N
  • 3 Pt. Lift at Lift pt: 13600
  • 3 Pt. -: Incl
  • PTO -: Incl
  • Engine Tier: 4
  • Hydraulic Type: PFC
  • Hydraulic Flow: 35 Gpm
  • Hydraulic Outlets: 4
  • Fuel Capacity: 170.4 Gal
  • Cab -: Incl
  • Cab Package: StdCV III
  • Monitor: Gen3 7" Display

Similar Equipment for Sale

Check Equipment Availability

Hello,
I saw your listing on IronSearch. I would like to learn more about...

Click to inquireClick to inquire

Check Equipment Availability

Hello,

I saw your listing on IronSearch. I would like to learn more about the 2019 John Deere 8295R Tractor, Iron #5231216, in Grafton, ND.

Please contact me by:

Thanks!

Send
Privacy PolicyPrivacy Policy